Professional 16channels Bluetooth Audio Mixer

MIC input interface

Balanced XLRinputconnection provides only highquality voice

Also available via a button like 48Vphantom powersupply using condenser microphoneBe sure to turn off the volume fader beforeactivating the phantom power

Channel gain control knob

To control the microphone line input levelAchievable channel gain of +10 t060dB

3.Channel high frequency adjustment knobControl the+-15dB increase or decrease ofthehigh frequency band of the channel equalizer at12KHZ

4.Medium frequency adjustment knobControl the +-15DB increase or decrease of thefrequency band in the channel equalizer at 1.2KHZ

5.Channel bass adjustment knob

Control the +-15dB increase or decrease of lowfrequency band of channel equalizer at 80HZ

6.AUX send knob

Controls the level of signals sent to the auxiliaryoutput bus

7.Effect send knob

Controls the signal level sent to the built-in effector

8. PAN audio and video balance knobControls left and right channel audio-visual

balance in stereo

9.Peak indicator

If the indicator is on frequently means the inputsignal of the channel is overloaded

The channel input gain must be reduced to avoidsound distortion

10.Channel volume attenuationAdjust the volume of the bus that enters the mixer Main output panel function

11.The effect.MP3 LCD

12.USB interface,which supports sound

card function

13.REC button:When a USB flash drive is insertedLong press this button to automatically enter

the recordingLong press this button to exit after recordingPress this button to automatically play therecording file.

14.Player operation buttons.

USB/BT button:Long press to switchbetween MP3 and Bluetooth playback

15.Player operation buttons.

REP button:Press to switch the track playingmode in MP3 playing state

16.Player control knob(Clockwise)Next

(Counterclockwise)the last tune

Press(play,pause)function

17.Effect mode selection knob

Turn the mode selection knob to select an effectnumber

The blinking number on the monitor shows thepreset program that has just been selectedTo confirm the selected preset program,pressthe knob to stop blinking.

18.Auxiliary output level adjustment

Controls the auxiliary AUX volume to the totalvolume of the auxiliary output interface

19.Headphones monitor volume knob

The volume of monitoring earphone can beadjusted through this knob

20.Switch button between TAPE input and MP3player Press this button when selecting MP3sound Press this button when selecting externalaudio signal input from TAPE interface

21.Adjust the treble of the player

Control the +-15dB increase or decrease of thehigh frequency band of the channel equalizer at12KHZ

22.Bass adjustment of player

Control the +-15dB increase or decrease of thelow frequency band of the channel equalizerat 100HZ

23.PAN audio and video balance knobControls left and right channel audio -visualbalance in stereo

24.Peak indicator light

If the indicator is on frequently mesns the input signalof the channel is overloaded

The channel input gain must be reduced to avoid

sound distortion

25.USB channel volume fader

Adjust the volume of the USB media player

26.Effector volume fader

Adjust the main volume mixed by effector

27.MAIN MAIN output volume fader

Adjust the fader to make the main output levelreach the ideal state

Adjusting properly adjusting parameter

28.7 band equalization regulatorProvides +-12dB gain in 7 bandsequalization can meet different needs of soundamplification

29.48V Phantom power switch

Press this switch to supply 48V power to thechannel balance interface properly

30.MAIN output volume level indicator

LED level indicator can accurately indicateOutput signal size of the mixer when the red lightis on,properly control the volume of the mixer toavoid damaging the device

31 Main channel balance output interface

32main channel 6.3 output interface

33 Aux auxiliary output interface

34 tapt stereo lotus input interface

35 monitor the earphone output

What's In the Box

16channels audio mixer Power cable And a users manual