Presonus Hp2: Personal Monitoring For Stage And Studio.
Presonus Hp2: Personal Monitoring For Stage And Studio.
PreSonus® HP-series headphone amplifiers have long been popular for their loud, clean, clear sound and roadworthy built quality. Designed for musicians and performers who demand mobility without compromising audio quality, the HP2 personal headphone amplifier is a great choice for driving wired in-ear monitors (IEMs), as well as headphones. The new HP2 delivers these qualities in an easily affordable, stereo device so you’ll hear every note and beat clearly wherever your music takes you.
Portable and compact, the HP2 gives you all you need to drive your headphones or in-ears without complicating your setup. It sports two XLR line-level inputs and one stereo 1/8-inch headphone output with volume control. Operation can be switched between stereo and mono, and a Pan knob is provided. Like all PreSonus gear, it’s built to take the rigors of life on the road. And it mounts on a microphone stand or clips to your belt. Simple, easy to use, built to travel, has the right features, sounds great.
Features
Meters, Controls, and Features
- Battery-powered, stereo headphone amplifier
- Volume control knob
- Pan control knob
- Stereo/mono operation switch
- Battery-health LED indicators
- Belt clip
Input/Output
- Inputs: 2 female XLR connectors
- Output: stereo, 1/8” phone connector
- 2m cable (5-pin mini XLR to 2 female XLRs) included
Physical and Power
- 9V battery or DC power supply
- 5/8-inch (27 tpi) microphone stand-mount socket
Mobile stereo headphone amplifier
- Ideal for wired in-ear monitoring
- Also suitable for mobile recording
- 2 Mounting options: Belt clip or 5/8" thread for tripod mounting
- Input: 2 x XLR female (Line L/R) via enclosed breakout cable
- Large volume control
- Large panorama control
- Panpot also serves as balance control between input 1 and 2 in mono mode
- Output: TRS stereo jack (3.5 mm)
- Frequency range: 30 Hz - 20 kHz (±2 dB)
- Maximum input level: +4 dBV
- Output power: 50 mW/channel (<0.01% THD+N @ 20 Ohm)
- Minimum impedance of headphones used: 12 Ohm
- Power supply: 9 V block battery (not included) or mains adapter
- On/off switch on the back
- Power LED
- Battery control LED
- Dimensions: 134 x 73 x 32 mm
- Weight: 450 g (without battery)
- Incl. 2 m breakout cable (mini 5-pin XLR to 2 x XLR female) and power supply unit (9 V/40 mA)