Super Uni-directional Condenser Microphone & Boom Mic For Camera

This is a directional electret condenser microphone designed for super sound recording with high sensitivity and minimal sound. it works very effectively in conditions of high ambient noise, both distant or near, because it has an integrated tele or normal function that can be adjusted from a built in switch. Kit comes with mounting boom systems (standard pole) and foam. Standard XLR plug connection.

This professional microphone system is designed for long distance camera recording and eliminate the noise of the surrounding.

- High quality electrets condenser.- Uni-directional, high sensibility, and good frequency response.- Best choice for business like media interview, conference, speech, stage, filming, television, camera and camcorder, DVD/Skype/Computer, etc- Camera microphone for different brands of camera.- Material: Metal, Plastic- Color: Black
Specification:
- Capsule Type: Condenser- Frequency Response:100Hz-16KHz- Output Impedance:1KΩ for short distance, 2.3KΩ or long distance- Sensitivity:-45dB for short distance;-38dB for long distance- Power Supply: DC1.5V- Directional: uni-ultra-directional- Effective pickup range: 3 meter- The using time of the battery: 26hours- Output: Unbalanced- Switch: Toggle
- Operation Method:- 1.Follow signs''+''-',battery are installed correctly,and connect the audio output line.- 2.First,the amplifier volume is controlled is the "0"position.then turn on the amplifier and the microphone,adjust the volume slowly until achieve the best.- 3.the best effects of pickup is away from the microphone head 30cm,keep this distance,the sound is best.
Size Chart:
Microphone Length: Approx. 36.3cm/14.29inchCable Length: Approx. 7m/22.97ftAnti-wind Foam Cap Length: Approx. 20.5cm/8.07inch
Note:1.Microphone head should not be toward speakers,in order to avoid howling.2.Don't adjust the volume too large,in order to avoid feedback howling.3.If you don't use the microphone for a long time,remove the batteries to dampproof.4.There are 1-3mm error of manual measurement.