Araldite Visa Epoxy Adhesives Set- 125ml - 2pieces
Araldite Visa Epoxy Adhesives Set- 125ml - 2pieces
Araldite epoxy adhensive is an eco-friendly solid adhesive that is safe, non-toxic, and fast-curing. Completely in compliance with RoHS, REACH and other green product certifications, Araldite adhesive consultants and R&D groups are here to meet all of your adhesive needs.
The super strong, gap-filling epoxy can be used for:
– Repairs
– Workshop
– Industry
– Household.
Waterproof, chemical & heat resistant
Bonds most of materials to themselves or to one another especially :
– Metal
– Glass
– Rigid plastic
– Wood
– Ceramics
– Concrete
Cures fast at room temperature (18 – 24 °C). Enable rapid but durable assembly and repair work. Cure slowly at temperature dawn 5 °C
How to use:
– Make sure surfaces to be joined are clean and free from dust, corrosion, dirt and grease.
– For optimum bonding, roughen smooth , glossy surfaces.
– Squeeze out equal amounts of Resin and Hardener
– Mix thoroughly and use within 5 minutes (if at 18-24 °C room temperature).
– Apply mix in both surfaces
– Assemble parts and hold together with clamps, tape, string or weight, etc. for at least 10-15 minutes.
– The newly bonded joint can be handled after 3 hours and attains its full strength after 8 hours.
**Important**
– To avoid contamination always replace same color cap on same colors tube.
– Avoid skin and eye contacts. Wash hands with warm water and soap.
Packaging 2 x 125ml set