B2 Pro Microphone
B2 Pro Microphone
Behringer
versatile use in most recording scenarios. A -10 dB pad switch provides headroom when recording loud signals that can distort on input, and a low-frequency roll-off switch minimizes low-end noise at 150 Hz. The microphone includes a shockmount, windscreen, and carrying case.
Switchable Polar Patterns
The B-2 features omni-directional, cardioid and figure 8 polar patterns for added flexibility.
High-Pass Filter Switch
A high-pass filter switch eliminates low frequencies at 150 Hz. This is useful when ambient hum or line noise is prevalent.
-10 dB Pad Switch
The B-2 is capable of handling Sound Pressure Levels of up to 135 dB, and a -10 dB pad switch allows for a total of 145 dB of headroom.
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 1.0" (25.40 mm) |
| Polar Pattern | Cardioid, Figure 8, Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | Cardioid: 77 dB A-Weighted |
| Equivalent Noise Level | Cardioid: 17 dB A-Weighted |
| Maximum SPL | Cardioid: 138 dB SPL 1% |
| Impedance | 100 ohms |
| Load Impedance | 1 kOhms |
| Sensitivity | Cardioid: 16 mV/PA @ 1 kHz |
| Power Requirements | 48 V |
| Low-Cut Filter | Yes, 6 dB/Octave @ 150 Hz |
| Pad | Yes, 10 dB |
| Output Connectors | 3-Pin XLR |
| Operating Current Consumption | 3.0mA |